%0 Journal Article
%@holdercode {isadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S}
%@nexthigherunit 8JMKD3MGPCW/3ESR3H2
%@archivingpolicy denypublisher denyfinaldraft
%@usergroup administrator
%@usergroup simone
%3 high pressure.pdf
%X The sintering conditions employed in this work are innovative, due to the use of an alternative technology to process ZrO2-REO (rare earth oxide mixture), so called high temperature  high pressure (HPHT). A pressure of 5GPa was used, temperatures of 1100, 1200, and 1300oC, for times of 2 and 5 minutes. The best results were obtained for samples sintered at 5GPa/1300oC/5min., where a micro-hardness of 4.8GPa, fracture toughness of 5.3MPa.m½, density of 97.9%, and 88% in volume of a tetragonal phase retained at room temperature were achieved.
%N 1
%T High pressure sintered ZrO2-6 % wt REO
%@secondarytype PRE PN
%K ZrO2, Rare earth oxides, Sintering, High pressures,Tetragonal phase.
%@visibility shown
%@group LAS-INPE-MCT-BR
%@secondarykey INPE-15109-PRE/10016
%@copyholder SID/SCD
%@issn 0350-820X
%2 sid.inpe.br/mtc-m17@80/2007/12.21.13.31.48
%@affiliation Instituto Nacional de Pesquisas Espaciais (INPE)
%@affiliation Universidade Estadual do Norte Fluminense (UENF)
%@affiliation Universidade Estadual do Norte Fluminense (UENF)
%B Science of Sintering
%P 17-24
%4 sid.inpe.br/mtc-m17@80/2007/12.21.13.31
%D 2007
%V 39
%@doi 10.2298/SOS0701017K
%A Kuranaga,
%A Bobrovnitchii,
%A Filgueira, M.,
%@dissemination WEBSCI
%@area FISMAT